Power Protection and Backup Products and Solutions by ASSI
"Power Protection and Backup" -- Power-system protection is a branch of electrical power engineering that deals with the protection of electrical power systems from faults through the isolation of faulted parts from the rest of the electrical network. The objective of a protection scheme is to keep the power system stable by isolating only the components that are under fault, whilst leaving as much of the network as possible still in operation. Thus, protection schemes must apply with very pragmatic and pessimistic approach to clearing system faults. The devices that are used to protect the power systems from faults are called protection devices. For the purposes of Computer Networks, protection devices are commonly Uninteruptable Power Supplies (UPS - Battery Backups), Surge Protection, Stand-alone Power Generators and Isolated Grounding Solutions.
We provide and consult on
Power Protection and Backup Solutions
because they are a requirement to effectively keep
Computer Networks Stable and functionaing properly.
Power is a dirty and unreliable utility even though,
we seldom see complete outages in todays
technological environment. But, low power
(Brown Outs), High Power (Surges) and momentary
interuptions are daily occurances and significantly
affect Computer Networks. Those, combined with
the occasional complete outage create a substantial
risk to business operations which is only mitigated
by having the proper Power Protection Systems in
place.
Computer Networks commincate using an Eithernet
standard IEEE 802.3. This in its simplest form
means the way the electrical signals and sent and
interpreted for them to be able to talk. But,
as with all technology... there is a simple set of
parameters which have to be in place and similar to
all devices in order to function. This is why
remote buildings often have catastrophic results if
direct connected by wire and are usually connected
via fiber optic cables. The problem that we
have today is that not only computers and servers
use this standard, but printers, wireless access
points, routers, cable modems and many, many other
devices all use the same communications
infrastructure... but are located in very different
locations within the buildings. A difference
in voltage, ground potential or interference or
noise can all impede a network from doing its job.
That is why having a centralized power location with
Power Over Ethernet (POE) is such a huge trend in
todays sales.
What else is important? Support, National Support, International Support and having the right protection that even allows you to travel and have the lowest cost for the majority of travel that you do. We help our clients choose, understand, implement, use and support the appropriate Power Protection Systems for their environment.
Call today for more
information and a free initial consultation.
Contact our Power Protection Specialist at:
+1 (561) 432-1404
Contact Center
Power Protection and Backup
- Learn what you need
- Determine what you want
- Find out what you an afford
- Figure out what your staff can handle
- Determine if your network can handle it
- Determine what you will lose
- Determine what you will gain
- Determine what level and type of hosting is right for your business
- Develop a good plan
- Pick your implementation date
- Acquire the solution
- Bring new System on line
- Train personnel
- Thoroughly Test Solution
- Revisit for any needed Phylosophy Changes
- Enjoy the benefits of your new system
Customer Testimonial
““Advanced Service Solutions has provided us with APC battery backups and surge protection. Since implementation, our equipment failure rate is significantly reduced if not all but eliminated. Some of the best money we have spent with increased productivity and our employees equipment seldom down.”